Festool SE-HL - Manual (Page 9)

9
Angle stop WA-HL (Order-No.485018)
The angle stop has two decisive advantages over
the normal parallel stop:
- the stop area is much larger and can also be
infi nitely adjusted between 0 and 45°.
- Setting and adjustment of the angle stop is car-
ried out with four rotary knobs.
You can move the angle stop laterally and verti-
cally after releasing the two rotary knobs (4.1). The
angle stop must be positioned laterally so that the
notch (3.1) is directly above the planer head.
The height adjustment of the angle stop is im-
portant to ensure that narrow and small work-
pieces can be safely processed when the stop is
pivoted.
The stop profi le should always be pushed as close
as possible to the rear planer plate.
Adjust the planing width with rotary knob (4.2).
Rotary knob (4.3) is used to swivel the stop profi le
steplessly from 0 to 45°.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As “downstream users”
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach