Festool CMS PS 300 - Manual (Page 11)

11
functions properly:
 Vacuum off dust deposits
 A worn or damaged bench insert is to be re-
placed
 On completion of your work, wind the power
cable around the holders (7.4).
Customer service and repair. Only
through manufacturer or service work-
shops: Please fi nd the nearest address
at:: www.festool.com/Service
EKAT
1
2 3 5
4
Use only original Festool spare parts!
Order No. at: www.festool.com/Service
7 Accessories, tools
For your own safety, use only original Festool ac-
cessories and spare parts. The accessory and tool
order number can be found in the Festool catalo-
gue or on the Internet under “www.festool.com”.
8 Disposal
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible
recycling centre! Observe the valid national regu-
lations.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach
9 EU Declaration of Conformity
Aufnahmeeinheit für Stichsägen
Retaining Panel for jigsaws
Plaque de fi xation pour la scie
sauteuse Serien-Nr.
Serial No.
N° de série
CMS-PS 200/PS 300 493938
We solely declare that this product conforms with
the following standards and normative docu-
ments:
EN 60745-1, EN 60745-2-11, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000 3-3 in accord-
ance with the regulations stipulated in Directive
2004/108/EC, 2006/42/EC, 2011/65/EU.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
20.02.2013