Gembird SIS-PMS-LAN - Manual (Page 10)

10
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
2.3. Indicators
• Main rocker switch Z (see Figure #1 above) is lit – this means that
SIS-PMS-LAN is connected to the power supply and active
• Power indicator (see Figure #1 above) is lit – this means that the
non-manageable sockets (marked with the sign ) are
switched on
• The indicator Socket 1 (2,3,4) (see Figure #1 above) is lit – this
means that this particular socket is switched on
• The indicator Schedule/LAN activity (see Figure #2 above) blinks
green – this means that there is some LAN activity taking place
• The indicator Schedule/LAN activity (see Figure #2 above) blinks
red as the reset procedure is being executed
• The indicator Schedule/LAN activity (see Figure #2 above) stays
red if an active hardware schedule for any socket exists