Gembird SIS-PMS-LAN User Manual
Page 11
11
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
3. Installation
•
It is strongly recommended to avoid damp or wet places for
installation.
•
SIS-PMS-LAN should be connected to the European AC wall socket
of the standard DIN 49 440.
3.1. Getting started
•
Connect SIS-PMS-LAN to the wall socket first and then to the LAN
socket (or your computer LAN card) with the provided patch cord or
vice-versa.
•
SIS-PMS-LAN can now be switched on and off by means of the
Main rocker switch (Z).
•
Two (the first and the last) sockets of SIS-PMS-LAN are marked with
the symbol
. These two sockets are switched on and off by
means of the Main rocker switch (Z) and cannot be managed by the
computer – so they are called non-manageable sockets in this
manual.
•
If SIS-PMS-LAN is switched on then the red indicator POWER is lit.
In this case both non-manageable sockets are now live and
connected to the power supply.