Braun Multiquick 5 K 700 - Manual (Page 11)

12
English
Our products are engineered to meet
the highest standards of Quality,
functionality and design. We hope you
thoroughly enjoy your new Braun
appliance.
Please read the use instruc tions
carefully before first use.
Important
• The blades l/n are very
sharp!
Take hold of the blades by the knob
only. After use, always first remove the
blades from the bowls 7/j before
removing the processed food.
• Make sure that your voltage corre-
sponds to the voltage printed on
the bottom of the appliance. Connect
to alternating current only.
• Keep the appliance out of the reach
of children.
• This appliance is not intended for
use by children or persons with
reduced physical, sensory or mental
capabilities, unless they are given
supervision by a person responsible
for their safety. In general, we recom-
mend that you keep the appliance
out of reach of children. Children
should be supervised to ensure that
they do not play with the appliance.
• This appliance was constructed for
household use only to process the
listed quantities.
• Do not use any parts in the microwave
oven.
• Make sure to avoid touching the
running drives with your fingers. Put
on the protective cover m whenever a
drive place is not in use, since both
drives rotate simultaneously when
switching on the appliance.
• Do not allow the appliance to operate
unsupervised.
• Braun electric appliances meet appli-
ca ble safety standards. Repairs or the
replacement of the mains cord must
only be done by authorised service
personnel. Faulty, unqualified repair
work may cause considerable hazards
to the user.
• Switch the appliance off and discon-
nect it from the outlet before storing it.
Specifications
• Voltage/wattage: See typeplate on
the bottom of the appliance.
• Operating time and max. capacity:
See processing instructions.
Description
The Braun Multiquick 5 with the 2-bowl
system meets highest demands for
kneading, mixing, blending, chopping,
slicing, shredding and grating, both
simply and quickly.
To obtain best results, two different
working bowls are available: a large
food processor bowl 7 and a small
chopper bowl j.
Thus, for chopping, puréeing or mixing
you can choose between the large and
the small working bowl. Moreover, you
can use the small bowl to prepare the
food which then can be further pro ces-
sed in the large bowl (e.g. to chop nuts
for a nut cake dough). Only one bowl
can be operated at a time.
1
Motor block
2
Cord storage
3
Motor switch (on = «I», off = «O»)
4
Pulse mode «P»
5
Variable speed regulator (1-15)
6
Safety lock (avoids simultaneous
operation of both working bowls)
7
Food processor bowl (2 l capacity)
8
Lid for food processor bowl 7
9
Pusher for lid 8
j
Chopper/mixer bowl for small
tquanti ties (0.75 l capacity)
q Lid for chopper bowl j
ß
11a
Seal ring for lid q
l
Blade for chopper bowl j
m
Protective cover for motor drive
when bowl has been taken off
Attachments for food processor
bowl 7
(Important: Not all attachments will be
included in the standard equipment of all
models).
n
Blade for food processor bowl 7
with protective cover
o Insert carrier
p
Fine slicing insert – a
q
Coarse slicing insert – b
r
Fine shredding insert – c
s
Coarse shredding insert – d
t
Grating insert – e
u
French-fries system
v
Kneading hook
w
Whipping attachment
Note: Before using the food processor
for the first time, clean all parts as
described under «Cleaning».
Overload protection
In order to avoid damages caused by
overload, this appliance is equipped with
an automatic security switch which
shuts off the current supply if necessary.
In such case, turn the motor switch 3
back to «off/0» and wait approx. 15 min-
utes to allow the motor to cool off before
switching on the appliance again.
Pulse mode «P»
The pulse 4 mode is for example useful
for the following applications:
• Chopping delicate and soft food, e.g.,
eggs, onions or parsley.
• Carefully folding flour into dough or
batter to maintain the creaminess.
• Adding whipped eggs or cream to
more solid food.
The pulse mode «P» is acti vated
by pressing the blue knob 4 on the
motor switch with switch set ting «O».
Before activating the pulse mode, set
the desired speed with the speed regu-
lator 5. When releasing the pulse knob
4
, the appliance is switched off.
Recommended speed ranges
for individual attach ments
Set the speed range by means of the
variable speed regulator 5. It is recom-
mended to first select the speed and
then switch on the appliance in order to
work with the desired speed right from
the beginning.
Attachments Speed range
Kneading hook 7
Blade l and n 6 - 15
Whipping attachment:
– egg-whites 4 - 5
– cream 2
Slicing, grating and
shredding inserts 1 - 8
French-fries system 1 - 2
(please also refer to product printing)
Working with the 2-bowl
system
Only one working bowl can be
operated at a time.
The working bowl which is not used
must be in the upper position or addi-
tionally, can be turned in the «click»
direction where it is locked in place.
When the arrow markings are aligned,
the bowl can be taken off. For safety
reasons, always put the protective cover
m
onto the free drive shaft after a bowl
has been taken off.
Double safety feature
The appliance can only be switched on
when the desired working bowl with lid
is properly engaged. If the lid is opened
during operation, the motor switches off
automatically. As in this case the motor
switch 3 is still on «I», turn it back to
«O» to avoid switching on the motor
accidentally.
92266253_K700_S06-116.indd 12 21.05.12 14:10