Edimax Technology BR-6478Gn - Manual (Page 32)

31
Item Name Description
User ID Input the user name assigned by your ISP here.
Password Input the password assigned by your ISP here.
PPTP Gateway Input the PPTP gateway assigned by your ISP here.
Connection ID Give this connection a name (optional).
MTU Input the MTU value of your network connection here. If you
do not know, use the default value.
BEZEQ‐ISRAEL Check the “Enable” box if you are in Israel and using BEZEQ
network services.
Connection Type Please specify a connection type here. There are 3 options:
1. “Continuous” keeps the Internet connection alive all the
time.
2. “Connect on Demand” only connects to the Internet when
you initiate Internet connection.
3. “Manual” connects to the Internet only when the
“Connect” button on this page is clicked, and disconnects
when the “Disconnect” button is clicked.
Idle Time Out Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
“Connect on Demand” is selected.
Click “Apply” to save the changes. After you have clicked “Apply”, you will see the following
message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐2‐5 L2TP
Select “L2TP” if your ISP is providing you Internet access via L2TP (Layer‐2 Tunneling
Protocol).
If your ISP is providing you dynamic IP addresses, select “Obtain an IP address
automatically”. If your ISP is providing you a static IP address, select “Use the following IP
address”.