Edimax Technology BR-6478Gn - Manual (Page 66)

65
Item Name Description
Enable Static Routing Check this box to enable the function.
Destination LAN IP Input the destination LAN IP here.
Subnet Mask Input the subnet mask of the destination network
here.
Default Gateway Input the gateway IP address that leads to the
specified network.
Hop Count Input the hop count (the distance between the
destination network and this broadband router) here.
Interface Select the interface that leads to the destination
network (LAN or WAN).
Add Click “Add” to add the settings to the table.
Reset Click “Reset” to clear all the settings.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have
clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐7 Firewall
You can configure the firewall functions under “Firewall” to protect your network and
computer.