Edimax Technology IC-3005Wn - Manual (Page 11)

11
1.5 Camera Installation
1. Unpack your Edimax IP Camera from its packaging and ensure that all the
items listed in Chapter 1 are there.
2. Connect the Edimax IP Camera to your network by attaching a network
cable from your switch or router to the LAN port on the IP Camera.
3. Connect the power adapter to the IP Camera and plug the adapter into a
power outlet. When the IP Camera is ready, the Blue LED will light up.
Note: It is highly recommended to use only the power adapter shipped with the
IP Camera. Do NOT use any other power adapter and avoid possible damage
to your new device.