Edimax Technology IC-3005Wn - Manual (Page 70)

70
You can put the mouse cursor on a certain component and see its button name,
and here‟re detailed descriptions of all buttons:
Item Description
Video displaying
area
The image of all connected cameras will be displayed
here.
Language Select a language from this dropdown menu to change
display language.
Display layout Change camera image display layout (Click a layout icon
to change camera display layout). There are 8 kinds of
available display layouts.
Full screen Click this button to switch to full screen mode (only
displ ay all camera‟s image), press „ESC‟ key to quit full
screen mode.
Scan Click this button and the IP camera surveillance software
will switch displaying the image of all connected camera
automatically. Click this button once to activate scan
function (scan icon will become blue ), click again to
stop scanning (scan icon will become white ).
Zoom out Zoom-out (To see more objects).
This function is only available for supported cameras.
Zoom In Zoom-in (Too see more details).
This function is only available for supported cameras.
PTZ control There are 8 directions in PTZ control ring. If the camera
you connect support PTZ, you can use PTZ control ring
to change the direction that camera points to.
This function is only available for supported cameras.
Home Click this button to return the camera to „Home‟ (default)
position.
This function is only available for supported cameras.
Recording Start video recording.
Configure Software / camera configuration.