Edimax Technology IC-3005Wn - Manual (Page 37)

37
selected choose to hide it
‟s SSID), you have to know it‟s
SSID and input it here, or you will not be able to connect
it.
Channel Select the radio channel you wish to use here. When
network type is
„Infrastructure‟, the radio channel is
auto-selected according to the channel that wireless
access point uses. You can only select the channel
number when network type is
„Adhoc‟.
Basic Rate Select the maximum wireless data transfer rate here,
from 1Mbps to 54Mbps. Maximum transfer rate for
802.11b wireless network is 11Mbps, and maximum
transfer rate for 802.11g wireless network is 54Mbps.
It
‟s recommended to select „Auto‟, so the data transfer
rate will vary according to the actual signal strength and
quality.
Authentication Select the wireless authentication here, and this setting
must be the same with the wireless access point you
selected.
When you select a wireless access point from the list, it
‟s
authentication type will be selected automatically, and
you should not modify it or you will not be able to connect
to the wireless access point you selected.
Available options are: None (no authentication), Open
System, Shared Key System, WPA-PSK, WPA2-PSK,
and WPANone (the last one is only for Adhoc).
Encryption Type Select the wireless encryption type here, and this setting
must be the same with the wireless access point you
selected.
When you select a wireless access point from the list, it
‟s
encryption type will be selected automatically, and you
should not modify it or you will not be able to connect to
the wireless access point you selected.
Available options are: None, WEP, TKIP and AES. The