Edimax Technology 3G-6200nL - Manual (Page 72)

72
following IP address’ (equal to static IP address, please refer to ‘PPPoE
xDSL’ section above).
WAN interface settings must be correctly set, or the Internet connection
will fail even those settings of L2TP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
Now please go to L2TP settings section:
Here are descriptions of every setup items:
Item Name
Description
User ID Please input user ID (user name) assigned by
your Internet service provider here.
Password Please input the password assigned by your
Internet service provider here.
L2TP Gateway Please input the IP address of L2TP gateway
assigned by your Internet service provider
here.
MTU Please input the MTU value of your network
connection here. If you don’t know, you can use
default value.
Connection Type Please select the connection type of Internet
connection you wish to use. There are 3
options:
‘Continuous’ - keep internet connection alive,
do not disconnect.
’Connect on Demand’ - only connects to
Internet when there’s a connect attempt,
Manual - only connects to Internet when
‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect button is
pressed.
Idle Time Out Please specify the time to shutdown internet
connect after no internet activity is detected in