Edimax Technology 3G-6200nL - Manual (Page 78)

78
3-3-2 LAN IP
If you enable “DHCP Server” , the router can assign IP address to PC
which connect with the router. You can use this setting to assign an IP
address to the LAN interface of this broadband router.
Here are descriptions of every setup items:
Item Name
Description
IP address Please input the IP address of this broadband
router’s LAN interface.
Subnet Mask Please input subnet mask for this network.
802.1d Spanning Tree If you wish to activate 802.1d spanning tree
function, select ‘Enabled’ for setup item
‘802.1d Spanning Tree’, or set it to ‘Disabled’.
DHCP Server If you want to activate DHCP server function
of this router, select ‘Enabled’, or set it to
‘Disabled’.
Lease Time Please select the lease time for every DHCP
leases here. You can select the time period from
the dropdown list, and the DHCP client will be
forced to obtain a new IP address from this
broadband router after this period of time.
You can select ‘Forever’ if you’re using this
broadband router with only few computers
(less than 30 computers)
Recommended Value if you don’t know what to fill:
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled