Edimax Technology EW-7722In - Manual (Page 37)

30
profile from an existing access point or wireless device, the
encryption type will be selected automatically, and please do
not modify it.
WPA
Preshared Key Input WPA preshared key here. If encryption is not enabled,
or you select ‘WEP’ as encryption type, this field will be
disabled and grayed out.
WEP Key You can select key type (Hexadecimal or ASCII) and input
WEP key here. If encryption is not enabled, or you select
‘WPA’ as encryption type, this field will be disabled and
grayed out. You can set up to 4 WEP keys here.
There are two types of WEP key: Hexadecimal and ASCII.
For Hexadecimal key, you can input number 0-9 and alphabet
a-f; for example, ‘001122aabbcc’; For ASCII key, you can
input number 0-9 and alphabet a-z; for example,
mywepkey12345.
The length of WEP key depends on the type of WEP key you
selected. You can input 10 or 26 hexadecimal characters and
5 or 13 ASCII characters as WEP key.
Show
Password Check this box and all passphrases or security keys you
inputted will be displayed as you type, but not replace your
input with asterisk.
Use 802.1x If the access point you wish to connect requires 802.1x
authentication, please click on ‘Use 802.1x’ box, then click
‘802.1X’ tab to set 802.1x parameters.