Edimax Technology EW-7722In - Manual (Page 38)

31
To set 802.1x authentication for the access point. Please click ‘802.1X’
tab:
Here are descriptions of every setup item:
Item Name
Description
EAP Method Select 802.1x EAP method from dropdown menu. Please ask
the administrator of the access point you wish to connect to
select a correct EAP method.
Tunnel
Authentication Select 802.1x tunnel authentication type from dropdown
menu. Please ask the administrator of the access point you
wish to connect to select a correct tunnel authentication
method. This pull down menu is only available when
authentication type you use is 'PEAP', ‘TLS / Smart Card', or
'TTLS'.
When you use 'EAP-FAST' as authentication type, the
protocol setting is always 'Generic Token Card' and can not
be changed. You also need to select ‘Soft Token’ or ‘Static
Password’ as password in ‘ID \ Password’ setting.
’EAP Fast’ authentication type also have a sub-menu to set
EAP fast-specific parameters: