Edimax Technology IC-7010PTn - Manual (Page 37)

37
The descriptions of every setting in this menu will be given below:
Item Description
Pan/Tilt Speed Specifies the moving speed when you use pan /
tilt function to point the camera to a new direction.
Available options are 1 (fastest) to 5 (slowest).
Select 1 to move the camera by a faster speed,
but you will not be able to control the movement
precisely. If you wan to move the camera in a
more accurate manner, select a slower speed.
Video Type Specifies video encoding type. Available options
are
„MPEG4‟, „MJPEG‟, and „H.264‟. Different
encoding type requires different bandwidth, and
provides different video quality.
Frequency If the place where this IP camera points to has a
(or more) fluorescent light(s), the image may look
flashing. In this case, you can adjust this setting
to the frequency of electrical power; this can
improve the image quality effectively. If you
don‟t know which one you should use, just try any
of them and select one with less flicker.
Flip Mode If you
‟re not putting this camera on a horizontal
surface but hang the camera on the ceiling or
wall, you can use this function to rotate the
displaying image.
Brightness /
Saturation /
Sharpness
Select brightness, saturation, and sharpness
from dropdown menu, and click
„ - ' or „ + „ button
to increase or decrease brightness / saturation /
sharpness setting value. In certain environment,
adjust brightness, saturation, and / or sharpness
will help improve video quality.
Volume Adjust the volume of audio output. Press
„+‟ or
„-„ button to increase or decrease volume.
NOTE: When you change any setting(s) listed above, please click ‘Apply’ button
so the change(s) will take effect. For following functions, changes will take effect
right away.