Edimax Technology IC-7010PTn - Manual (Page 47)

47
3. When you move the camera to the position you want, type a name in
„Position name‟ field, and click „Set to Point n‟ (where „n‟ is the number of
memory slot) button to save the position to selected memory slot.
After you set the position, you can recall the position from
„Camera‟ menu (click
the position number button), and the camera will move to preset position
instantly.
If you want to remove a preset position, select the memory slot from „Available
Positions
‟ dropdown menu, and then click „Remove Point n‟, (where „n‟ is the
number of memory slot you wish to clear position setting).