Edimax Technology IC-7010PTn - Manual (Page 80)

80
setting of your computer if the IP address of your
computer does not begin with
‘192.168.2’, and subnet
mask is not
‘255.255.255.0’, or you’ll not be able to
connect to this IP camera again.
Reboot Device If you found the IP camera is responding slowly or
behaves strange, you can click this button to try to reboot
the IP camera, this may help.
LED Setting Click
„Turn off LED light‟ button to switch the LED light of
this IP camera off, so all LEDs on the IP camera will stop
working, in case you don ‟t want other people know the
camera is transferring data.
You can click this button again to switch LED lights on
again.
Click „Apply‟ to save settings and make the new settings take effect.