Edimax Technology PT-31W - Manual (Page 42)

41
Enable
(Window 1 to
Window 3)
Check this box to enable this motion detection window. You can select
window 1 to 3 to enable up to 3 motion detection windows. When a
motion detection window is enabled, a rectangular will appear on
camera’s view, with its title on the top.
- To move / resize a motion detection window:
- Move: Use the mouse to drag the title text.
- Resize: Use the mouse the drag the four corners (upper-left/right,
lower-left/right) to resize it. If you only want to adjust width or
height, drag the four sidebars (top, bottom, left, and right).
Title
(Window 1 to
Window 3) Input characters in title field to change motion detection area’s title text
so you can identify it.
Please note that you have to click ‘Apply’ button and the text will
change.
Percentage Select the percentage of pixel change that will trigger motion detection
alert. Select a lower percentage and you can detect tiny changes in
motion detection area.
Sensitivity Select the sensitivity level that will trigger motion detection alert. Select
a higher sensitivity and you can detect tiny changes in motion detection
area.
When you finish with above settings, click ‘Apply’ button to save changes.
3-8 PTZ Control (RS-485)
If you mount the IP camera on pan-tilt camera cradles that support pan-tilt control via
RS-485 connection, you can use this function to control pan-tilt camera cradle so you can
control the orientation of IP camera from remote place.