Edimax Technology PT-31W - Manual (Page 82)

81
No: Do not display caption on camera view
Camera ID: Display Camera’s ID number
Camera ID + Camera Name: Display both
camera’s ID and camera’s name.
Data Storage Setting Setup hard disk data storage:
Enable Recycle: Check this box and the latest
recording video will overwrite oldest recorded
video file automatically. If you didn’t check this
box, EdiView will stop recording when data
storage space is full.
Alarm Space: When data storage space is less
than the size you specified here, you’ll receive
an alarm message to notify you should do
something to prevent from running out of
storage space.
Locations: Lists all data storage space
configured. You can all / modify spaces below.
Browse: Select a drive or folder on your
computer for recording data storage. You can
also create a new folder when you’re prompted
to select a drive or folder on your computer.
Safe Space: Specify the lower limit of storage
space you specified. When remaining storage
space is less than the size you specified here,
EdiView will stop recording**.
Add/Modify: You can click this button to add
the drive / folder you specified above to storage
space list, or select an existing storage space in
the list to change its parameters then click this
button to update its parameter.
Remove: Select a pre-defined storage space and
click this button to remove it from the list.
Alarm Space When data storage space is less than the size