Edimax Technology BR-6641 - Manual (Page 33)

BR-6641 User Manual
32
100Mbps/Full duplex
Health
Detection Never
Always
Only when no
packet is received This function is used to configure the WAN
link health detection mechanism for the
specific WAN link. Please refer to Chapter
3.2.1 WAN Link Health Detection.
Clone MAC Normally DHCP will assign IP dynamically.
Static IP, however, can be assigned to the
WAN link via the DHCP server with MAC
address binding. You can enable the 'Mac
Cloning' option to force the DHCP server to
assign the static IP according to the
BR-6641's MAC address.
MAC xx-xx-xx-xx-xx-xx Input the Clone MAC Address.
Table 3.3 DHCP Mode