Edimax Technology BR-6641 User Manual
Page 72
BR-6641 User Manual
71
are still reachable via other live WAN links.
In order to let your Multihoming function properly, you must make sure that the
requirements listed below are met.
Prerequisites for Multihoming:
Multiple WAN links (at least two).
Registered domain names for your publicly accessible servers.
Your publicly accessible servers must be configured as virtual servers, or have public
IP addresses.
By default, Multihoming is switched off. To use this service, check the check box to
the right of “Enable Multihoming” on the top of the page. There are three tables for
configuring your Multihoming settings. The first table lets you define the global
parameters. The second table is used to configure your domain name settings.
Global Setting
Specify the PTR data in this field, including TTL, IP Address, and Host Name for
reverse looking up the host name of corresponding IP Address.