Edimax Technology IC-3015Wn - Manual (Page 27)

26
kinds of wireless network. If you select B,
G, or N only, then IP camera will be able to
communicate with wireless network of
same operating mode only.
Band Select wireless band: 20MHz only or
20/40MHz auto switch. It’s recommended
to select ‘Auto 20/40MHz’.
Available
Networks IP camera will list all nearby networks and
their parameter in this field. If the network
you wish to connect does not appear hear,
click ‘Refresh’ to rescan again. You can
click ‘Refresh’ button for many times until
the network you wish to connect appear in
the list.
If you wish to connect to a specific
network, select the radio button of the
network you wish to connect (under
‘Connect’ field), and the network’s
connection parameter will appear in the
fields below.
Tips: If you can’t see the network you wish
to connect after you click ‘Refresh’ button
for many times, please move IP camera
closer to the network’s access point).
SSID Input network’s SSID (access point’s
wireless name) here, or select one network
from network list above.
If he network you wish to connect is a
‘hidden’ network (SSID is hidden to the
public), you have to input SSID manually.
Channel Select wireless channel number. Use ‘Auto’
to select channel automatically.
Authentication Select authentication type: