Edimax Technology IC-3015Wn - Manual (Page 53)

52
configuration as a file and save it on your
computer’s hard drive.
Restore Config Click ‘Browse’ button to select a
previously‐saved configuration file on your
computer’s hard drive, and then click
‘Apply’ to upload the configuration file.
Reboot Now Click this button to reboot IP camera. This
function is useful when you think IP
camera is not working properly.
Reset to default Reset the IP camera’s setting back to
default value. There are 2 options:
1) Keep Network Setting: Reset all settings
back to default value, except network
settings. You can still use the same IP
address to connect to the IP camera.
2) Factory Default: Reset all settings,
include network settings. Please
reconnect to IP camera by its default IP
address: 192.168.2.3
Click ‘Apply’ to reset. You can press and
hold ‘WPS / Reset’ button for more than
10 seconds to reset IP camera’s setting to
default value.