Edimax Technology IC-3015Wn User Manual
Page 9
![background image](/manuals/233741/9/background.png)
8
1.4 Installing the Network Camera
Please follow the following instructions to setup your new IP camera.
1. Secure the IP Camera to the tripod or camera stand by mounting hole. If you
want to place the IP camera on desk, please make sure it will not fall down by
accident.
2. Connect Ethernet cable to LAN port. For first‐time installation you’ll need
Ethernet cable to do configuration; If this IP camera is configured to use
wireless network, you can skip this step.
3. Plug DC power adapter to power outlet on the wall.
4. Connect DC power cable to IP Camera’s DC power connector.
Connect Ethernet net cable
Connect DC power cable to DC Jack