Edimax Technology AR-7167WnB - Manual (Page 25)

21
 Dynamic IP Address
Parameter Description
Encapsulation Please check with your ISP the method of multiplexing.
In Bridge Mode, please select
“1483 Bridge IP LLC” or
“1483 Bridge IP VC-Mux”.
Bridge Interface This router has built-in ADSL modem and is able to
connect to ISP directly. Alternatively, if you want to use
the dial up software to manually connect to the ISP, you
have to activate the
”Bridge Interface”.
Default Route When “Default Router” is enabled, all the packets for
destinations not known by the router's routing table are
sent to the default route. By default, it is enabled.
TCP MSS Option The “TCP MSS Option” enables the configuration of the
maximum segment size (MSS) for transient packets that
traverse a router, specifically TCP segments in the SYN
bit set, when PPPoE is being used in the network. Please
specify the MSS range from 100 to 1452 bytes or 0 byte
as the default value.
NAT NAT (Network Address Translation), an Internet standard
that enables a local-area network (LAN) to use one set of