Edimax Technology AR-7167WnB - Manual (Page 34)

30
dynamic routing. After the RIP protocol is selected,
please choose the RIP direction from
“None”, “Both”, “IN
Only
” or “OUT Only”.
DHCP Select whether DHCP is Disabled, Enabled or Relay.
Start IP If the DHCP Server is enabled, please set the “Starting
IP Address ” which will be the first IP Address assigned to
the LAN client. By default, the “Starting IP Address” is
192.168.2.100.
IP Pool Count You can select a particular IP address range for your
DHCP server to issue IP addresses to your LAN Clients.
By default, the
“IP Pool Count” is 100. The IP range is
starting from IP 192.168.2.100 to 192.168.2.199.
Lease Time In the Lease Time setting you can specify the time period
that the DHCP Server lends an IP address to your LAN
clients. The DHCP will change your LAN client‟s IP
address when this time threshold period is terminated.
DNS Relay A Domain Name System (DNS) server is like an index of
IP addresses and Web addresses. If you type a Web
address into your browser, such as “www.router.com”, a
DNS server will find that name in its index and the
matching IP address. Please select “Use Auto
Discovered DNS Server Only ” to auto set the DNS
Server. If there is a DNS server that you would rather to
use, please select
“Use Discovered DNS Server Only”
and you need to specify the IP address of that DNS
server.
Primary DNS Enter the
ISP‟s DNS Server IP Address; or you can
specify your own preferred DNS Server IP Address.