Edimax Technology AR-7167WnB User Manual
Page 56
52
Interface
Select which channel (PVC) to configure.
Direction
Select the access to the Internet (Outgoing) or from the
Internet (Incoming), or Both.
Rule Type
Select to filter through the IP Address or MAC Address.
Source IP Address
Enter the start IP Address which will be monitored. If
“0.0.0.0” is set, it means for any IP Address.
Subnet Mask
Enter the Subnet Mask based on the Source IP Address.
Port Number
LAN users use port number to distinguish one network
application over another such as 21 is for FTP service.
The port number range is from 0 to 65535. It is
recommended that this option be configured by an
advanced user.
Destination IP Address Enter the start IP Address which will be monitored. If
“0.0.0.0” is set, it means for any IP Address.
Subnet Mask
Enter the Subnet Mask based on the Destination IP
Address.
Port Number
This is the port or port ranges that define the application.
Protocol
It is the packet protocol type used by the application.
Please select
“TCP”, “UDP” or “ICMP”. For example, FTP
service, you have to select
“TCP”.
IP / MAC Filter Listing The IP/MAC Filter Listing will list the IP/MAC Filter rules
you have configured. You can review the settings here.
When you are done making changes, click on SET to save your changes,
DELETE to delete the rule with the parameters you set or CANCEL to exit
without saving.