Symbols, abbreviations and terms used – Fein AStxe649_1 User Manual
Page 12
12
en
Instruction manual – Hacksaw for pipes and profiled sections.
Symbols, abbreviations and terms used.
Symbol, character
Explanation
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Do not touch the saw blade.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Additional information.
Confirms the conformity of the power tool with the directives of the European Community.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø
Diameter of a round part
Maximum outside diameter for pipes/with chain extension
Maximum material dimensions
Plastic
Weight according to EPTA-Procedure 01/2003
Low stroke rate
High stroke rate
WARNING
Ø
PVC
3 41 01 081 06 0.book Seite 12 Freitag, 1. August 2008 8:37 08