Symbols, abbreviations and terms used – Fein WPO 14-15E User Manual
Page 17
17
en
Original Instructions for Angle Polisher.
Symbols, abbreviations and terms used.
Symbol, character
Explanation
General prohibition sign. This action is forbidden!
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Additional information.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø
Diameter of a round part
Ø
D
=Max. application tool diameter
M=Thread for clamping flange
l=Length of mounting thread
Weight according to EPTA-Procedure 01/2003
Low speed
High speed
WARNING
M
l
3 41 01 113 06 0.book Seite 17 Dienstag, 8. Dezember 2009 7:51 07