M-AUDIO DMAN - Manual (Page 30)

30
Where pathname is the path (drive and directory) of the
application file, and filename is the name of the file to run.
3. Save and close the CSACBAT1.INI file.
The following is an example of the command lines in the
CSACBAT1.INI file that would cause Windows Write to start up
when you select the user-defined button:
[APPLETS]
UserAppPath=C:\Windows
UserApp=write.exe
Another good use of the button would be to run a .WAV file
editor.
Sound Check Application
The Sound Check application verifies proper operation of digital
audio playback. When executed, the application displays the
following panel and plays back a short digital audio music bite.
The test audio should be high-quality 16-bit stereo at 44.1 kHz
sampling frequency.