Hama VMSA User Manual
Page 10
ENGLISH
Step 8: Wire Management
Before beginning wire management pull the television into the position as far from the wall as possible. Leave some slack in the cables
so that during motion there is no added tension on the connectors. There are several places to attach wire management ties to keep cords
out of the way. Wire Tie Clips (f) can be attached to the bottom of the pillow block by press fitting them into the pillow block. Wire Ties
(g) can then be added to the Wire Tie Clips, and the holes in the sides of any of the Monitor Brackets (d).
Detailed View
Diagram 8
holes in monitor bracket
pillow block
f
Sanus Systems 2221 Hwy 36 West, St. Paul, MN 55113 11.15.05
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
VMSAins_011206_ML.indd 10
1/16/06 5:22:03 PM