MAXWELL MW-1917 BK - Manual (Page 11)

11
ENGLISH
Suitable and not suitable cookware
Use cast-iron, steel (enameled steel) cookware, ferrous cookware or special cookware for
induction cookers. Aluminum, copper, high-temperature glass and other non-magnetic cookware
is not suitable for induction cooker. More information about suitable and not suitable cookware is
given in the picture below:
Using the unit
Before switching on the unit, make sure that the mains voltage corresponds to the voltage
specified on the unit body.
• Before switching on make sure that the cooker is clean and dry.
• Set cookware in the center of the heating element.
Note: It is necessary to use cookware with bottom diameter a little less or a little more than hob
diameter (within some centimeters). You should also take into account that the thicker and
smoother the bottom the less power is needed for cooking.
• Insert the plug into the socket, you will hear a sound signal.
• Switch on the unit by pushing the button (10), the operation indicator above the button will
light up, the cooling fan will switch on, and one sound signal will be heard. The unit is ready
for operation.
Note: If there are no operations within 30 seconds, the unit enters standby mode, and you will
hear one sound signal.
Constant temperature mode
• Press the Temperature setting button (9) (180оС will be set by default), the corresponding
operation indicator will light up, and “1Н” (1 hour) operation time in this mode will be shown
on the display.
MW-1917.indd 11 23.05.2012 12:54:06