STIEBEL ELTRON SHW ... S 01.11.2007 - 05.05.2013 - Manual (Page 15)

15
English Fault Cause Remedy
No hot water. – Safety temperature limiter has actuated. – Rectify the cause of the fault; replace the
regulator/limiter combination.
4. Fault finding
- qualified installer
3. Fault finding
- user
No hot water. – No voltage. – Check the fuses in the house installation.
– Dirt or limescale on the perlators in the
fittings or the shower heads.
Fault Cause Remedy
– Clean the drain fittings and/or remove
limescale.
Tabelle 2
– Rapid heating system not switching on. – Check the switch contactor and replace it
if necessary.
No flow volume.
6. Environment and
recycling
5. Guarantee
For guarantees please refer to the pespective
terms and conditions of supply for your
country.
The installation, electrical connection
and first operation of this appliance
should be carried out by a qualified
installer.
The company does not accept liability for
failure of any goods supplied which accor-
dance with the manufacturer's instructions.
– Replace the heating element. – Heating element defective.
Tabelle 3
Recycling of obselete appliances
Appliances with this label must not
be disposed off with the general
waste. They must be collected
separately and disposed off according to local
regulations.
240394-34664-8275 SHW 200-400 S.pmd 13.12.2007, 11:25 15