Eizo FlexScan HD2441W - Manual (Page 15)

13
English
 When connecting a PC with USB connection [USB]
Switch the USB setting of the monitor to either “PC 1” or “PC 2”, according to the PC used.
If it is not set properly, the USB devices connected to the monitor may not work or no sound may come
out from the speakers.
Attention
• When switching the USB setting, a message window may appear.
Message:
“If the USB setting is changed, the USB connection to the selected PC will be lost. Do you change the setting?”
When the message is displayed, note the following.
- When connecting a memory device such as a USB memory to the monitor, do not change the
setting. The data may be lost and damaged. Be sure to change the USB setting after removing the
memory device.
- When an application such as a sound playback, etc. works, do not change the setting. The sound
may not output when the setting is returned to the original. Be sure to change the USB setting after
exiting from the application.
1. Touch .
The Setting menu appears.
2. Select the <USB> icon and tap the slide bar.
The <USB> menu appears.
3. Trace the slide bar left and right to select the setting.
4. After the setting is completed, tap the slide bar.
The USB setting is completed.
5. Touch .
The Setting menu quits.
 Sound volume is too high/too low [Volume]
Adjust the volume.
1. Tap the slide bar.
The Volume menu appears.
2. Trace the slide bar left and right to adjust the volume.
Tracing the slide bar to the left makes the sound volume
low and right makes it high.
Attention
• Turn off the monitor if you do not use the monitor for a long time. Unplugging the power cord
completely shuts off power supply to the monitor.
USB menu
Volume menu
Prior to use Installation Troubleshooting Setting/Adjustment