Eizo FlexScan HD2441W - Manual (Page 8)

6
English
Troubleshooting Setting/Adjustment Installation Prior to use
Controls and Functions
1 Sensor Detects the environmental brightness. BrightRegulator function (see page
15).
2 Input Signal Selection Switch
( ) * 2
• Displays/Quits the Input Selection menu.
• When touching for approx. 2 sec. while using the PC input signal, a video
display appears on the monitor. PinP (Picture in Picture) function.
3 Slide bar * 2 • Uses when the setting/adjustment is performed on each menu.
• When touched it while the menu is not displayed, the Volume menu appears.
4 Menu switch ( ) * 2 Displays/Quits the Setting menu.
5 Power switch ( ) Turns the power on or off.
6 Power indicator Indicates monitor’s operation status.
Blue : The screen is displayed Orange : Power saving
Off : Power off
7 Security lock slot Complies with Kensington’s MicroSaver security system.
8 Audio output terminal [Stereo mini jack] Connects the built-in amplifier speakers, etc.
9 Input signal connectors
(VIDEO 1/2)
[HDMI connector × 2] Connects AV equipment.
10 Input signal connector (PC 1) [DVI-D connector] Connects a PC.
11 Input signal connector (PC 2) [D-Sub mini 15-pin connector] Connects a PC.
12 USB ports (Up) [Upstream × 2] Connects a PC.
13 Headphone jack [Stereo mini jack] Connects headphones.
14 USB ports (Down) [Downstream × 2] Connects a peripheral USB device.
15 ArcSwing 2 Stand Used to adjust the height and angle of the monitor screen.
16 Cable holder Covers the monitor cables.
* 1 ScreenManager ® is an EIZO’s nickname of the Setting menu.
(In this manual, the setting/adjustment item names in the Setting menu are put in angle brackets < >. (ex. : <Color>))
* 2 When touching while the power turns off, the monitor turns on.
7
1 2 3 4 5 6 11 10 9 8
15
16
13
14
12
Setting menu
(ScreenManager ® * 1 )
Power connector