TP-Link TL-WR940N - Manual (Page 19)

300Mbps Wireless N Router TL-WR940N/TL-WR941ND
-11-
2. After successfully login, you can click the Quick Setup to quickly configure your router.
Figure 3-5 Quick Setup
3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
Figure 3-6 Choose WAN Connection Type
The router provides Auto-Detect function and supports five popular ways Dynamic IP,
Static IP, PPPoE, L2TP and PPTP to connect to the Internet. It’s recommended that you
make use of the Auto-Detect function. If you select Auto-Detect, the router will automatically
detect the connection type your ISP provides. If you are sure of what kind of connection type
your ISP provides, you can select the very type and click Next to go on configuring.
)
Note:
L2TP and PPTP cannot be detected by the router. You must select it manually.
4. Make sure the cable is securely plugged into the WAN port before detection. The appropriate
configuration page will be displayed when an active Internet service is successfully provided
by the router.
1） If the connection type detected is Dynamic IP, Click Next you can go on with the wireless
configuration.