TP-Link TL-WR940N - Manual (Page 20)

300Mbps Wireless N Router TL-WR940N/TL-WR941ND
-12-
2） If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-7.
Figure 3-7 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
¾ Default Gateway - Enter the gateway IP address into the box if required.
¾ Primary DNS - Enter the DNS Server IP address into the box if required.
¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field.
3） If the connection type detected is PPPoE, the next screen will appear as shown in
Figure 3-8.
Figure 3-8 Quick Setup – PPPoE