TP-Link TL-WR940N - Manual (Page 24)

300Mbps Wireless N Router TL-WR940N/TL-WR941ND
-16-
Figure 3-11 Quick Setup – Wireless
¾ Wireless Radio - Enable or disable the wireless radio using the WiFi button on the
device.
¾ Wireless Network Name - Enter a value of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
(XXXXXX indicates the last unique six numbers of each router’s MAC address). This
value is case-sensitive. For example, TEST is NOT the same as test.
¾ Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the router can be used. It may be illegal to use the wireless
function of the router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.