FIAT 500 User Manual
Page 140
FOR CHECKING AND RESTORING
PRESSURE ONLY
The compressor may also be used for restoring
pressure only. Release the quick coupling and
connect directly to the tyre valve fig. 107; in this way,
the bottle will not be connected to the compressor
and no sealant will be injected.
CYLINDER REPLACEMENT PROCEDURE
To replace the bottle, proceed as follows:
❒ disconnect connection A fig. 108;
❒ turn the cylinder to be replaced anticlockwise and
raise it;
❒ fit the new cylinder and turn it clockwise;
❒ connect connection A to the cylinder and insert
the transparent tube B fig. 108 into its housing.
fig. 107
F0S0124
fig. 108
F0S0125
137
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX