FIAT 500 - Manual (Page 151)

REPLACING FUSES
GENERAL INFORMATION
Fuses protect the electrical system: they intervene
(blow) in the event of a fault or improper action
on the system.
When a device does not work, check the condition
of its fuse: the conductor element A fig. 124 must be
intact. If it is not, replace the blown fuse with
another with the same amperage (same colour).
B fig. 124 intact fuse;
C fig. 124 fuse with damaged filament.
To replace a fuse, use the pliers D fig. 124 hooked
inside the fusebox on the left side of the instrument
panel.
Refer to the tables on the following pages to identify
the protective fuse.
WARNING
If the replaced fuse blows again, contact
a Fiat Dealership.
WARNING
Never replace a fuse with metal wires or
anything else.
WARNING
Never replace a fuse with another with
a higher amp rating; DANGER OF FIRE.
fig. 124 F0S0065
148
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX