FIAT Panda Classic - Manual (Page 129)

❒ loosen the bolts on the wheel to be re-
placed with the tool E-fig. 4 provided;
❒ turn handle to partially open the jack;
❒ loosen the clamping device B-
fig. 3;
❒ take out the tool container C and take
it near the wheel to be changed;
❒ take the space saver spare wheel D;
❒ to remove the wheel cap secured by
spring, use the screwdriver provided
levering on the three notches present
on the outer circumference;
fig. 4 F0G0695m
128
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
fig. 3 F0G0078m
To change a wheel proceed as follows:
❒ Stop the car in a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
ground should be flat and adequately
firm;
❒ turn the engine off and pull up the hand-
brake;
❒ engage first gear or reverse;
❒ lift the luggage compartment mat A-
fig. 2;
fig. 2 F0G0171m
123-154 Panda New GB 21-06-2007 13:51 Pagina 128