FIAT Panda Classic - Manual (Page 179)

MODEL PLATE fig. 2
The plate is to be found on the left side of
the boot floor and it bears the following
identification data:
B Homologation number.
C Vehicle type code.
D Chassis number.
E Maximum vehicle weight fully loaded.
F Maximum vehicle weight fully loaded
with trailer.
G Maximum vehicle weight on front axle.
H Maximum vehicle weight on rear axle.
I Engine type.
L Body version code.
M Spare part code.
N Smoke opacity index (for diesel en-
gines).
IDENTIFICATION DATA
You are advised to note the identification
codes. The identification data stamped and
given on the plates and their position are
the following fig. 1:
1 Model plate.
2 Chassis marking.
3 Bodywork paint identification plate.
4 Engine marking.
fig. 1 F0G0219m
fig. 2 F0G0702m
178
W
ARNING
LIGHTS AND MESSAGES
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
177-196 Panda New GB 21-06-2007 13:53 Pagina 178