FIAT Panda Classic - Manual (Page 144)

143
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
Number plate light
To change the bulb, proceed as follows:
❒ use a screwdriver to remove the re-
taining spring as shown in fig. 35;
fig. 35 F0G0099m fig. 36 F0G0100m
THIRD STOP LIGHT
To change the bulb, proceed as follows:
❒ slacken the two screws A-fig. 37 and
remove the whole cover;
❒ disconnect connector B-fig. 38 and re-
move the light unit;
fig. 37 F0G0101m
fig. 38 F0G0210m
❒ remove the transparent A-fig. 36 and
the bulb B from the bulb holder;
❒ change the 12V-5W bulb pressure-fit-
ted in the bulb holder;
❒ refit the lens.
123-154 Panda New GB 21-06-2007 13:51 Pagina 143