SEVERIN TO 2030 User Manual

Page 8

Advertising
background image

any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.

Children should be supervised to ensure
that they do not play with the appliance.

Caution: keep any packaging materials
well away from children, as they are a
potential source of danger e.g. from
suffocation.

No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.

This appliance is intended for domestic
use only and not for commercial
applications.

In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.

Before using for the first time
- Clean the appliance (see General care

and cleaning) and completely remove
any packing materials.

- Before using the appliance for the first

time, let it heat up for 15 minutes (see
Operation). When the appliance is
switched on for the first time, a slight
smell may be emitted. This is normal and
will only last for a very short time. Ensure
sufficient ventilation.

Temperature control
Turn the temperature control to the desired
setting.
The heating elements will only switch on
after the timer is activated.

Timer
The timer can be used for either selecting a
certain cooking time (up to 60 minutes), or
for continuous operation.
To select continuous operation, turn the
timer switch anti-clockwise to its position.
To turn the unit off, turn the switch to
position . To pre-programme the
cooking time, turn the switch clockwise to
the desired time.
To set a time of less than 10 minutes, turn
the timer to a somewhat higher setting first
and then slowly turn it back to the desired
time setting. After the pre-programmed time
has elapsed, an acoustic signal indicates that
the heating elements are switched off.

Indicator lamp
The indicator lamp lights up when the
appliance is switched on with the timer. It
goes out once the pre-programmed time has
elapsed, or if the switch is turned back to
position .

Operation
- Fit the grill rack or the baking tray.
- Pre-heat the oven compartment for

several minutes with the door closed,
using the temperature control to set the
required temperature, and the timer to
set the desired pre-heating time.

- Place the food to be cooked onto the

rack. When cooking food containing fat
or moisture, use the tray to stop any drips
into the interior of the appliance.

- Close the glass door and use the timer to

choose the desired cooking time, or
continuous operation.

- After the pre-programmed cooking time

has elapsed, the timer will automatically
switch off the heating elements.

- To interrupt the cooking process, or to

switch off the oven during continuous
operation, set the timer switch to .

- When opening the hot glass door after

operation, always use the handle. To
remove the baking tray or the rack,
always use a suitable oven-cloth Always

8

Advertising