HONDA 2013 Civic Coupe - Manual (Page 257)

uu Maintenance Under the Hood u Engine Coolant
256
Main
tenan
ce
1. Make sure the engine and radiator
are cool.
2. Turn the radiator cap counterclockwise and
relieve any pressure in the coolant system.
Do not push the cap down when turning.
3. Push down and turn the radiator cap
counterclockwise to remove it.
4. The coolant level should be up to the base
of the filler neck. Add coolant if it is low.
5. Put the radiator cap back on, and tighten
it fully.
6. Pour coolant into the reserve tank until it
reaches the MAX mark. Put the cap back
on the reserve tank.
■ Radiator 1 Radiator
NOTICE
Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the engine compartment.
3 WARNING
Removing the radiator cap while the
engine is hot can cause the coolant to spray
out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator cap.
Radiator Cap
1.8 ℓ engine models
2.4 ℓ engine models
Radiator Cap
13 CIVIC 2D-31TS86100.book 256 ページ ２０１２年１０月２６日 金曜日 午前８時４９分
2013 Civic Coupe
Home
QRG
Index
TOC