Dot tire quality grading (u.s. vehicles) – HONDA 2013 Civic Coupe User Manual

Page 278

Advertising
background image

277

uu

Checking and Maintaining Tires

u

DOT Tire Quality Grading (U.S. Vehicles)

Continued

Main

tenan

ce

DOT Tire Quality Grading (U.S. Vehicles)

The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires

to Department of Transportation (DOT) standards. The following explains
these gradings.

Quality grades can be found where applicable on the tire sidewall between tread
houlder and maximum section width.

The treadwear grade is a comparative rating based on the wear rate of the
tire when tested under controlled conditions on a specified government test
course. For example, a tire graded 150 would wear one and one-half (1 1/2)
times as well on the government course as a tire graded 100. The relative
performance of tires depends upon the actual conditions of their use, however,
and may depart significantly from the norm due to variations in driving habits,
service practices and differences in road characteristics and climate.

Uniform Tire Quality Grading

Treadwear

1

Uniform Tire Quality Grading

For example:

Treadwear 200

Traction AA

Temperature A

All passenger car tires must conform to Federal
Safety Requirements in addition to these grades.

13 CIVIC 2D-31TS86100.book 277 ページ 2012年10月26日 金曜日 午前8時49分

2013 Civic Coupe

Home

QRG

Index

TOC

are also graded for treadwear, traction, and temperature performance

Advertising
This manual is related to the following products: