HONDA 2013 Civic Coupe User Manual
Page 66
65
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Malfunction
Indicator Lamp
●
Comes on when you turn the
ignition switch to ON
(
w
, and goes
off either when the engine starts or
after several seconds if the engine
is not started. If “readiness codes”
have not been set, it blinks five
times before it goes off.
●
Comes on if there is a problem
with the emissions control system.
●
Blinks when a misfire in the
engine's cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 323
●
Comes on while driving - Have the
vehicle checked by a dealer.
●
Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Charging System
Indicator
●
Comes on when you turn the
ignition switch to ON
(
w
, and goes
off when the engine starts.
●
Comes on when the battery is not
charging.
●
Comes on while driving - Turn off the
heating and cooling system
*
/climate
control system
*
and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Shift Lever
Position
Indicator
*
●
Indicates in which position your
shift lever is.
—
Indicator
*
Not available on all models
13 CIVIC 2D-31TS86100.book 65 ページ ２０１２年１０月２６日 金曜日 午前８時４９分
Home
QRG
Index
2013 Civic Coupe
TOC