HONDA 2012 CR-Z Navigation - Manual (Page 12)

Navigation System 11
CR-Z_KA 31SZT810
Getting Started
Joystick/ENT button
Moves left, right, up, and down to move
the highlighting around the display, to
scroll through lists, or to look around a
displayed map. After making a selection
in a menu or list, push in on the joystick
to enter the selection into the system.
In almost all cases, you can enter a
selection into the system by using the
voice control system, highlighting the
item and pushing in on the joystick, or
by touching the appropriate item you
wish to select.
INFO button
Displays the screen for selecting
Cellular Phone, Voice Command
Help, Map Legend, Calendar, and
Calculator. See page 70.
MAP/GUIDE button
Displays the map. When en route,
switches between the
map, guidance,
and Direction list screens. See page 19
or 51.
MENU button
Displays the
Enter destination by
screen. When en route, displays the
Change route by screen. See page 22.
SETUP button
Displays the
Setup screens where you
can customize information in the
system. See page 75.
CANCEL button
Cancels the current screen and returns to
the previous screen display.
NOTE:
The
NAVI BACK button on the steering
wheel performs the same basic function.
ZOOM (IN)/ (OUT) buttons
Press ZOOM
to zoom in (to show
more detail), or ZOOM to zoom out
(to show more area and less detail)
while a
map screen is displayed.
ZOOM IN reduces the scale (showing
less area with greater detail). ZOOM
OUT increases the scale (showing more
area with less detail).
AUDIO button
Press to display the
audio screen.
For information on audio system
features, see the Audio section of your
Owner’s Manual.
Other buttons
See the Audio section of your Owner’s
Manual.
Screen
All selections and instructions are
displayed on the screen. In addition, the
display is a “touch screen” – you can
enter information into the system by
touching the images (icons) on the
screen with your finger.
For example, if you need to enter a
street name, a keyboard will be
displayed. You can type in the street
name by saying or selecting the
individual characters on the screen.
Clean the screen with a soft damp cloth.
You may use a mild cleaner intended for
use on liquid crystal displays (LCDs).
Harsher chemicals may damage the
screen.
00 CR-Z_KA.book 11 ページ ２０１１年８月９日 火曜日 午後４時１７分