Driving to your destination – HONDA 2012 CR-Z Navigation User Manual

Page 63

Advertising
background image

62

Navigation System

CR-Z_KA 31SZT810

Viewing/Saving the Current

Location

Whenever you are on a

map screen, you

can always obtain your current location
either by touching the Vehicle Position
icon

or by using the voice control

system and saying “Display current
location.” A screen pops up which
shows the address of your current
location, as well as the latitude,
longitude, and elevation.

NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown on
roadside elevation signs, and may
fluctuate plus or minus 100 feet or more.

You can store the current location for
later use. It does not change or cancel
your current route.

For example, you are following the
system’s directions to get to a
destination. While sitting at a stoplight
you notice a store on the corner, but do
not have time to visit it right now. You
can save the location to select as a
destination at a later date.

To save the location, say “Save current
location” or select

Save on the screen.

When you select “User 1” or “User 2,”
the

Edit address book screen with the

current location data will appear. You
can edit the name, phone number, or
category name to be saved in your
personal Address Book.

After the location is saved, select

Return to return to the map screen.
You can then use

Address Book from

the

Enter destination by screen to

select the saved location and return to
the same spot.

Driving to Your Destination

00 CR-Z_KA.book 62 ページ 2011年8月9日 火曜日 午後4時17分

Advertising
This manual is related to the following products: