System setup – HONDA 2012 CR-Z Navigation User Manual

Page 96

Advertising
background image

Navigation System

95

CR-Z_KA 31SZT810

System Setup

Clock Settings

From the

Setup screen (second), say or

select

Clock Settings and the

following screen appears:

Clock Adjustment
When you select

Clock Adjustment,

the following screen appears:

This screen allows you to set or adjust
the following:

• Auto Daylight Saving Time

(Default = On)

• Auto Time Zone by GPS

(Default = On)

• DST (Daylight Saving Time)

Selection
(change DST schedule)

• Time Adjustment (adjust your clock)

Reset button (resets this screen’s
settings to factory defaults)

Auto Daylight Saving Time
Sets automatic daylight saving time

On

or

Off. If set to On, the clock will

automatically “spring ahead” or “fall
back” by one hour when a daylight
saving time change occurs. If you reside
in a state or area where daylight saving
time is not used, then you may want to
turn this feature off.

NOTE:
If you set Auto Daylight Saving Time to

On, the daylight saving time function is
activated even in an area that does not
use daylight saving time.

The federal government mandated that
starting in 2007, daylight saving time
begins in March and ends in November
instead of the old schedule from April to
October.

The schedules for the time changes are
stored in the software and can be
selected in the

DST schedule

selection screen. Therefore, your clock
will change based on the daylight saving
time schedule.

NOTE:
The automatic clock setting feature
relies on a satellite signal. It will not
work in Hawaii and Alaska.

07 CR-Z_KA.fm 95 ページ 2011年8月25日 木曜日 午前8時48分

Advertising
This manual is related to the following products: